Sitemap
-
Home
-
Products
- IncOder™
- LinTran
- OEM Rotary
- OEM Linear
- Examples
- ATEX Rotary Encoder
- Angle Resolvers for Gimbal System
- Azimuth Angle Encoder
- Flight Qualified Rotary Sensor for Flight Surface Control
- Programme Rotary Sensor
- Linear Sensor
- Flow Sensor
- Harsh Environment Linear Transducer
- Tandem Rotary Encoder for Optical System
- Linear Sensor for Mixing Desk
- OEM Linear Transducer
- Angle Encoder for Petrochemicals
- Absolute Encoder
- Bearingless Angle Encoder
- Bearingless Encoder
- Brushless Encoder
- Electric Encoder™
- High Resolution Encoder
- Inductive Encoder
- Inductive Ring Encoder
- Inductosyn®
- Pancake Resolver
- Resolver
- Ring Encoder
- Rotary Variable Differential Transformer (RVDT)
- Rotary Variable Inductive Transducer (RVIT)
- Linearly Variable Differential Transformer (LVDT)
- Slab Resolver
- Synchro
-
Technology
-
Industries
-
Company
-
Support
- Technical White Papers
- Accurate Position Measurement in Varying Temperatures
- Accuracy, Resolution, Repeatability
- Are Optical Encoders as Accurate as you think?
- Choosing the right Position Sensor
- Custom versus Standard Sensors
- Accurate Measurement of Shaft Speed
- Everything You Need to Know About Slab Resolvers
- How Inductive Sensors Work
- Incremental versus Absolute Sensors
- Inductive Versus Magnetic Position Sensors
- Measuring Position or Speed in Harsh Environments
- Measuring the Rotation Angle of Large Diameter Shafts
- Resolvers, Optical Encoders and Inductive Encoders
- Specification of Angle Sensors
- Tandem Encoders
- The True Cost of Potentiometers
- Traditional Versus New Generation Inductive Position Sensors
- Why do engineers dislike potentiometers?
- Angle Conversion Tables
- Position & Speed Sensors for High Vibration Environments
- Position Sensors for Safety Applications
- SSI – A Masterclass For Engineers Choosing a Position Sensor
- Inductively Resonant Position Sensing
- A Comparison of Inductive and Capacitive Position Sensors
- Direct Drive Motors & Direct Sensors
- ‘Shapeability’ for Custom Position Sensor Requirements
- Why Some Encoders Don’t Like Winter
- An Encoder Trade Secret Revealed
- Optical Encoders Versus Inductive Encoders
- Position Sensors – A Dummy’s Guide
- Ultra-Slow Motion Control
- The CAD Jockey’s Guide to Ring Encoders
- BiSS – a CAD Jockey’s Guide
- Incremental Encoders Versus Absolute Encoders
- Torque Measurement with angle sensors
- Frameless Resolvers versus Ring Encoders
- Shaft Encoders & Bearingless Encoders
- FAQs
- Technical White Papers
IncOder Specific
-
-
- How do IncOders work?
- Is IncOder measurement truly absolute for absolute output devices?
- Do IncOders carry out self checks or Built-In-Test (BIT)?
- What happens if the Rotor or Stator get wet or dirty?
- Are IncOders affected by magnets?
- How can we specify a custom IncOder variant?
- Does measurement performance vary with Rotor concentricity?
- Can IncOders be used for airborne applications?
- Can we route the cable out radially rather than axially?
- Are IncOders suitable for use in harsh electromagnetic fields?
- Can an IncOder run with a different electrical output such as 4…20mA?
- At what Baud rate can the Data interface operate at and does this effect cable length?
- Can IncOders be used outside the stated operating temperature limits?
- Are there lightweight IncOder versions?
- Can IncOders be used submerged in oil or water?
- Do IncOders produce electromagnetic emissions?
- Do IncOders require an Export License?
- How can an IncOder be calibrated?
- What if we need to earth the IncOder casing?
- Does the Rotor need electrical earthing?
- Does measurement performance vary with Rotor to Stator gap?
- Are ATEX rated versions of IncOder available?
- Are IncOders RoHS & REACH Compliant?
- How do we fit the Set Screw Rotor with a Servo Clamp Stator?
- Do IncOders outgas?
- What’s the largest IncOder you can build?
- Are IncOders available with alternative metal finishes?
- How does Zettlex manage the obsolescence of electronic components?
- What’s the difference between an IncOder and an encoder?
- Why are there different part numbers for different voltage ranges when most IncOders accept a wide voltage range?
- What happens if we install the IncOder with an air gap bigger or smaller than the stated axial tolerances?
- What happens if we install the stator and rotor with a radial mismatch which is bigger or smaller than the radial tolerances?
- What causes the measurement error in the IncOder’s output?
- Can we get a higher accuracy if we install more accurately?
- What happens to accuracy if measurement range is reduced?
- How do we calibrate in situ?
- If we calibrate with 3 or 4 points will there be an improvement in accuracy?
- What is the temperature coefficient?
- Why is IncOder’s thermal coefficient so small?
- What happens if ice gets between stator and rotor?
- Why are the Extended Range Cold Temperature Options only available in 12 or 24V?
- Will 5V work at lower than -40C?
- Why does IncOder offer so many versions of SSI?
- Why don’t you do a sin/cos output?
- Can an IncOder replace a resolver?
- What is BiSS-C?
- Will you ever do an angle sensor with CAN output?
- Will you ever do an encoder with EtherCAT output?
- Why don’t you make bigger than 590mm diameter?
- We need a drop in replacement for a failing capacitive encoder – can you make one?
- Does IncOder software comply with DO-178?
- Does hardware comply with DO254?
- Will IncOders be OK submerged?
- What’s the pressure rating for IncOder operation?
- What happens in the design of Extended Range option for extreme shock and vibration?
- What is the difference between standard and extended range?
- How do you test IncOders?
- Can we swap Rotors and Stators?
- Can we just buy a Stator?
- Can we just buy a Rotor?
- If we order a quantity of say 50 or 100 what lead time is required?
- If we order a quantity of >20 can we have them delivered in batches?
- How long can a cable be from an IncOder?
- What materials can be placed between Rotor and Stator?
- What is the maximum gap between Rotor and Stator?
- What does update rate mean?
- What is ‘static’ accuracy?
- What is the precision of an IncOder?
- Is it possible to have an update rate of 2kHz?
- What is the difference between INC-3-75-180101-SSI1-AC1-12-AN and INC-3-75-181001-SSI1-AC1-12-AN?
- Is there an advantage to an update rate of 10kHz compared to 1kHz?
- What is the lead-time for a standard IncOder?
- Can we get a Certificate of Conformity?
- Can we place an order using credit card?
- What happens if an IncOder is used above the stated max. measurement speed?
- Are IncOders space qualified?
- Can IncOders operate submerged in oil?
-
General Technology
-
-
- Why do you use the term ‘position sensor’?
- How many sensors can a Zettlex electronics sensor handle?
- Are Zettlex sensors susceptible to emissions from other sources?
- How far can a Target be away from the Antenna?
- What’s the smallest sensor you’ve built?
- What’s the biggest sensor you’ve built?
- How accurate are Zettlex sensors?
- How can we develop a Zettlex system specific to our requirements?
- Can the Zettlex sensor electronics be part of a host system’s electronics?
- How do Zettlex sensors perform in harsh EMC environments?
- Can Zettlex sensors of different geometries be controlled by a single set of electronics?
- Can the sensor operate through a metal shield?
- What emissions do Zettlex sensors produce?
- How much does a Zettlex sensor cost?
- What temperatures can a Zettlex sensor cope with?
- Do magnets affect Zettlex sensors?
- How far can the Electronics be away from the Antenna?
- Do nearby metal objects affect Zettlex sensors?
- How much power does a Zettlex sensor need?
- How many identities can a Target carry?
- How can we be sure of confidentiality?
- How can we be sure that a Zettlex sensor will work?
- CAD Files
- Company Documents
- Product Specification Requirements
- Product Support
- Partner Area
-
-
News & Events
-
Contact
-
Online Shop
- Mini IncOder Range
- Midi IncOder Range
- Maxi IncOder Range
- Shaft IncOder Range
- Cables, etc.
- 10-way Cable, 10m
- 10-way Cable, 5m
- 10-way Cable, 2m
- 8-way Cable, 10m
- 8-way Cable, 5m
- 8-way Cable, 2m
- 8-way Cable, High Temp. 10
- 8 way Cable, High Temp. 5m
- 8 way Cable, High Temp. 2m
- 100mm IncOder Rotor Shaft Clamp
- 100mm IncOder Shim
- 100mm IncOder Spacer Ring
- 125mm IncOder Rotor Shaft Clamp
- 125mm IncOder Shim
- 125mm IncOder Spacer Ring
- 150mm IncOder Rotor Shaft Clamp
- Cables, etc. Page 2
- 150mm IncOder Shim
- 150mm IncOder Spacer Ring
- 175mm IncOder Rotor Shaft Clamp
- 175mm IncOder Shim
- 175mm IncOder Spacer Ring
- 200mm IncOder Rotor Shaft Clamp
- 200mm IncOder Shim
- 200mm IncOder Spacer Ring
- 225mm IncOder Rotor Shaft Clamp
- 225mm IncOder Shim
- 225mm IncOder Spacer Ring
- 250mm IncOder Rotor Shaft Clamp
- 250mm IncOder Shim
- 250mm IncOder Spacer Ring
- 300mm IncOder Rotor Shaft Clamp
- 300mm IncOder Spacer Ring
- Cables,etc. Page 3
- LinTran Linear Position Sensors