Teknik Tanitim Belgeleri

Konum-Sensörlerinin-1

Konum Sensörleri – için Basit Anlatımlı Kılavuz

Konum sensörleri ve konum algılaması hakkında temel bilgiler edinir. Bu makale mühendisler, teknisyenler ve öğrenciler içindir - özellikle de bir öğrenme eğrisini çabucak alması gerekenler.
Makale Oku >
Mutlak-kodlayıcılar-artımlı-kodlayıcılar

Mutlak kodlayıcılar karşı artımlı kodlayıcılar

Artımlı enkoderler, mutlak enkoderler ve yalancı mutlak enkoderler ile bunların göreceli güçlü ve zayıf yönlerini inceleyen makale.
Makale Oku >
Doğrudan-Tahrikler-Doğrudan-Sensörler

Doğrudan Tahrikler Motorlar ve Doğrudan Sensörler

Teknik makale, daha geleneksel motor düzenlemelerine doğrudan tahrik ve sensörlerin kullanımını karşılaştırır ve karşılaştırır - yeni nesil bir sensör tavsiye eder.
Makale Oku >
tork ölçümü

Açılı sensörlerle tork ölçümü

Bu makale, ilk olarak 1950'lerde kullanılan açılı sensörlerle torkun ölçülmesi için kullanılan bir tekniği incelemektedir. Pek çok avantajı olsa da, bu tekniğin modası geçmiş gibidir ama...
Makale Oku >
enduktif sensorler nasil calisir_

Endüktif sensörler nasıl çalışır

Senkrolar, Çözücüler, RVDT'ler, LVDT'ler dahil endüktif sensörlerin nasıl çalıştığı ve bunların güçlü ve zayıf yönlerinin neler olduğunu keşfeden bir makale
Makale Oku >
dogruluk cozunurluk tekrar edilebilirlik

Doğruluk, Çözünürlük, Tekrar Edilebilirlik ve Bütün O Şeyler

Doğruluk, Çözünürlük, Tekrar Edilebilirlik ve Bütün O Şeyler. Uygulamanız için doğru ölçümü seçerken bunlar önemlidir.
Makale Oku >
Artımlı sensörlere karşı mutlak konum sensörleri

Artımlı sensörlere karşı mutlak konum sensörleri

Benzersiz temassız bir endüktif konum algılama tekniği göz önüne alınarak Artımlı ve Mutlak Konum Sensörlerinin karşılaştırılması.
Makale Oku >
optik kodlayıcılar

Çözücüler, optik kodlayıcılar ve endüktif kodlayıcılar

Çözücüler, Optik Kodlayıcılar ve Endüktif Kodlayıcıların her birinin zayıf ve güçlü yönlerinin incelenmesi ve alternatifler sunulması.
Makale Oku >
Shaft encoders

Shaft Encoders & Bearingless Encoders

This short paper discusses shaft encoders and bearingless encoders; their relative merits and where design engineers might deploy each type.
Read Article >
Frameless Resolvers

Frameless Resolvers versus Ring Encoders

This article discusses frameless resolvers and ring encoders; compares their merits and suggests an alternate approach.
Read Article >
BiSS

BiSS – a CAD Jockey’s Guide

BiSS is a communications system used in industrial automation. It’s a way of exchanging digital data between different parts of a control system.
Read Article >
Ring Encoder

The CAD Jockey’s Guide to Ring Encoders

Ring Encoder refers to a device which measures angular position or speed, has a large through hole and produces an electrical signal proportional to angle.
Read Article >
Motion-controls

Ultra-Slow Motion Control

This article looks at Ultra-slow speed motion control and, in particular, the critical role of position and speed sensors.
Read Article >
optical encoders

Optical Encoders Versus Inductive Encoders

An investigation into how optical encoders and inductive encoders work and the relative strengths and weaknesses of each technique.
Read Article >
encoder

An Encoder Trade Secret Revealed

Trade secret which has become an unfortunate and widespread aspect of specmanship in the rotary sensor and angle encoder industry.
Read Article >
Encoders Winter

Why Some Encoders Don’t Like Winter

Article investigates why optical and capactive encoders aren't suited to winter conditions and suggest alternative options.
Read Article >
Custom sensors

‘Shapeability’ for Custom Position Sensor Requirements

Article investigating the role of custom position sensors and encoders for certain applications with bespoke specifications.
Read Article >
capacitive sensors

A Comparison of Inductive and Capacitive Position Sensors

A comparison of capacitive sensors and inductive sensors, their relative benefits and weaknesses and new generation alternative.
Read Article >
Inductively resonsant position sensors

Inductively Resonant Position Sensing

This article compares and contrasts traditional inductive position sensors and inductively resonant position sensors, also known as Incoders.
Read Article >
SSI – A Masterclass for Engineers Choosing a Position Sensor

SSI – A Masterclass For Engineers Choosing a Position Sensor

This paper describes the Synchronous Serial Interface (SSI) used by many position sensors and controllers.
Read Article >
Position Sensors for Safety Applications

Position Sensors for Safety Applications

Position sensors for safety applications - design approach for sensors in safety related applications covering self diagnostics, built-in-test and duplex.
Read Article >
Position & Speed Sensors for High Vibration Environments

Position & Speed Sensors for High Vibration Environments

10 rules for design engineers selecting position and speed sensors that need to cope in shock and high vibration environments.
Read Article >
angle conversion

Angle Conversion Tables

Angle Conversion Tables for high resolution position sensors in extreme environments.
Read Article >
Why-do-engineers-dislike-potentiometers

Why do engineers dislike potentiometers?

Why do engineers dislike potentiometers? Next generation, non-contact inductive position sensors for hostile environments.
Read Article >
Traditional Inductive Position Sensors versus New Generation Zettlex Sensors

Traditional Versus New Generation Inductive Position Sensors

Traditional v New Generation Inductive Position Sensors. Non-contact, high accuracy, sensors and encoders.
Read Article >
True Cost of Potentiometers

The True Cost of Potentiometers

Potentiometers are still, by far, the most commonly used position sensor. But is their reputation for low cost justified?
Read Article >
tandem encoder

Tandem Encoders

Tandem Encoders - next generation inductive encoders produced in either incremental or absolute forms. Tandem Encoder can produce a digital data stream.
Read Article >
angle sensor

Specification of Angle Sensors

Specification of Angle Sensors, insight into terminology for measurement performance and how to specific an angle sensor that is right for your application.
Read Article >
Large diameter shaft measurement

Measuring the Rotation Angle of Large Diameter Shafts

Measuring the Rotation Angle of Large Diameter Shafts Rotary Encoder - a review of traditional approach and new, robust, more accurate inductive approach.
Read Article >
Measuring Position or Speed in Harsh Environment

Measuring Position or Speed in Harsh Environments

High accuracy, non-contact inductive position sensors and encoders for measuring Position or Speed in Harsh Environments.
Read Article >
inductive versus magnetic position sensors

Inductive Versus Magnetic Position Sensors

Comparison of Inductive and Magnetic Position Sensors, including Hall Effect, Magnetostrictive, Traditional Inductive and New Generation.
Read Article >
Slab resolvers

Everything You Need to Know About Slab Resolvers

Reviewing slab resolvers and how they compare to optical encoders and new generation incoders for measuring position in harsh environments
Read Article >
shaft speed

Accurate Measurement of Shaft Speed

Accurate Measurement of Shaft Speed, motion control; aircraft flight controls; radar antennae; and weapons control systems.
Read Article >
Custom versus Standard Sensors

Custom versus Standard Sensors

Custom versus Standard Sensors - background to high resolution, precision, non-contact encoders and sensors for extreme environments.
Read Article >
Choosing the right Position Sensor

Choosing the right Position Sensor

Choosing the right Position Sensor - evaluation of potentiometers, optical, magnetic, capacitive and inductive position sensors and encoders.
Read Article >
Optical Encoder Accuracy

Are Optical Encoders as Accurate as you Think?

Technical article investigates optical encoder accuracy and how it compares to the new generation inductive encoders. 
Read Article >
Accurate Position Measurement in Varying Temperatures

Accurate Position Measurement in Varying Temperatures

A number of tips for engineers designing for accurate position measurement in varying temperatures. 
Read Article >
Connect with Zettlex

Ask a question

Technical support

This website uses cookies to provide you with the best user experience and site functionality, and provides us with enhanced site analytics. By continuing to view this site without changing your web browser settings, you agree to our use of cookies. To learn more, please view our privacy policy.